Engine & Filters

Set Of 4 Blanking Plates For When Removing The P.A.I.R System That's Fitted To The MKII Bandit Engines

Made From 2mm Thick Bright Annealed Stainless Steel To Give A Polished Look

The P.A.I.R. System Isn’t Required For The UK As An Emissions Test Isn’t Part Of The M.O.T These Were Fitted Purely To Allow the manufacturer To Get Around The Emissions Controls When These Bikes Were New Many People Remove The Whole System As They Are Not Nice Looking, Go Rusty And Are Extra Weight On An Already Heavy Bike

Once The Original System Is Removed Replacement Gaskets Can Be Made From Gasket Paper, Or Just Use Silicone Sealant Or Instant Gasket Just To Prevent Any Leaks

Kit Comes Complete With 4 Stainless Plates, 8 Stainless Bolts & 8 Stainless Washers

Will Fit: GSF600 Bandit 2000-2004 GSF1200 Bandit 2001-2006 GSF650 Bandit 2005-2006

Visbella High Temperature Black RTV silicone Gasket Maker

Visbella® High Temperature RTV Silicone is designed for Automobile production of bonding and sealing.

This product is a one component RTV Silicone sealant, curing completely without odor release.

Acid & Neutral solidified into elastic rubber strip after full cure.

It’s used for in engine, high-temp pipe system, gearbox, carburetor etc.

4L Motul 5000 10w/40  High Quality Semi Synthetic Oil - Jaso MA2 High Quality Pattern Oil Filter

Motul 5000 Semi Synthetic 10w/40 4T Motorcycle Engine Oil 1 Litres

Putoline Super DX4 10W-40 Semi Synthetic Oil

1L Bottle

4 x High Performance Foam Air Filters

Fit GSF600 Bandit 95-04

Improves Acceleration and gives greater horsepower 

Look Great on any Streetfighter project

PLEASE NOTE: It is essential after fitting these filters to rejet and reset your carburettors otherwise you may cause serious damage to your engine

17mm Nut Fitment for Easier Fitting and Removal

With Lock Wire Hole

68mm Oil Filter Wrench

Replacement Clutch Kit For Suzuki GSF600 Bandit 95-04

Kit Contains EBC heavy duty clutch friction plates, EBC clutch springs, and high quality Pattern Clutch Cover Gasket

• Genuine EBC Clutch Diaphragm Spring
• The EBC diaphragm spring is 10-15% stiffer than standard
• Direct Replacement

Full Engine Side Casing Gasket Set

For GSF600 Bandit 95-04

Gaskets for signal generator cover, starter gear cover and clutch cover  

Replacement Valve Stem Seals

Good Quality Direct Replacement For Originals

Kit Contains 8 x Inlet Seals & 8 x Outlet Seals

Will fit the following: GSF600 Bandit 1995-2004 GSF650 2005 - 2006 GSF1200 Bandit 1996-2005

Replacement Cylinder Head Gasket

Good Quality Athena Gasket

Direct Replacement For Original

Will fit the following: GSF600 Bandit 1995-2004 GSX600F 1988-2001

Replacement Cylinder Base & Head Gaskets

Good Quality Athena Gasket

Direct Replacements For Originals

Will fit GSF600 Bandit 95-04

Complete Gasket Set for GSF600

High Quality Athena Gaskets

Consists of all gaskets and seals required to rebuild top end of engine

Manufactured from high quality materials

Will fit: GSF600 95-04 and GSX600F 88-97

Carburettor Inlet Rubber Cylinder Head O-Rings

Original O-rings Tend To Flatten And perish Over Time  

If Removing The Inlets Then Its Recommended To Change The O-rings To Prevent Air Leaks

4 Supplied

Will fit:

GSF600 ALL MODELS

GSF1200 Mk I Only 1996 - 2000

GSF650 2005 - 2006

Carburettor Repair Kits

Available as a Pack of 1 or 4

High Quality Replacement Part

Carburettor Float Needle Valves Available as a Pack of 1 or 4 High Quality Replacement Part

Engine Oil Seal Kit

Top Quality Seals Made In Japan To OEM Specs

Kit Contains Four Seals

1 x Carburettor Mixture Screw

with Spring O Ring and Washer

 High Quality Replacement Parts

Will Fit:  GSF600 95-04,  GSF650 05-06,   GSX750 98-03