Engine & Filters

Visbella High Temperature Black RTV silicone Gasket Maker

Visbella® High Temperature RTV Silicone is designed for Automobile production of bonding and sealing.

This product is a one component RTV Silicone sealant, curing completely without odor release.

Acid & Neutral solidified into elastic rubber strip after full cure.

It’s used for in engine, high-temp pipe system, gearbox, carburetor etc.

High Quality Replacement Cam/Timing Chain

High Quality Pattern Part Comes Complete With Rivet Link

Simple To Fit With Correct Tools & Mechanical Knowledge Open Old Cam Chain & Connect With New Cam Chain, Pull Through & Rivet New Chain This Will Save Several Hours Of Work As The Engine Doesn’t Have To Be Fully Stripped

Will Fit: GSF1200 Bandit 1996-2005

Motul 5000 Semi Synthetic 10w/40 4T Motorcycle Engine Oil 1 Litres

Putoline Super DX4 10W-40 Semi Synthetic Oil

1L Bottle

68mm Oil Filter Wrench

17mm Nut Fitment for Easier Fitting and Removal

With Lock Wire Hole

Replacement Clutch Kit For Suzuki GSF1200 Bandit 96-05

Kit Contains EBC heavy duty clutch friction plates, EBC clutch springs, and high quality Pattern Clutch Cover Gasket

Full Engine Side Casing Gasket Set

For GSF1200 Bandit 96-06

Gaskets for signal generator cover, starter gear cover and clutch cover  

Replacement Valve Stem Seals

Good Quality Direct Replacement For Originals

Kit Contains 8 x Inlet Seals & 8 x Outlet Seals

Will fit the following: GSF600 Bandit 1995-2004 GSF650 2005 - 2006 GSF1200 Bandit 1996-2005

Replacement Cylinder Head Gasket

Good Quality Athena Gasket

Direct Replacement For Original

Will fit the following: GSF1200 Bandit 1996-2005

Cam Cover/Rocker Cover Gasket & 4 x Mickey Mouse Spark Plug Hole Gaskets

Good Quality Pattern Part

Direct Replacement for Original Parts

Will fit:

GSF1200 Bandit 96-05

Cam Chain Tensioner Gasket

Good Quality Athena Gasket

Direct Replacement

Will fit all GSF600 and GSF1200 Bandit and GSF650 05-06

Complete Gasket Set for GSF1200

High Quality Athena Gaskets

Consists of all gaskets and seals required to rebuild engine

Manufactured from high quality materials

Will fit: GSF1200 96-05

Engine Oil Seal Kit

Top Quality Seals Made In Japan To OEM Specs

Kit Contains Four Seals

High Quality Replacement Cam/Timing Chain

Simple To Fit With Correct Tools & Mechanical Knowledge Open Old Cam Chain & Connect With New Cam Chain, Pull Through & Rivet New Chain This Will Save Several Hours Of Work As The Engine Doesn’t Have To Be Fully Stripped

Will Fit: GSF600 Bandit 1995-2004

Set Of 4 Blanking Plates For When Removing The P.A.I.R System That's Fitted To The MKII Bandit Engines

Made From 2mm Thick Bright Annealed Stainless Steel To Give A Polished Look

The P.A.I.R. System Isn’t Required For The UK As An Emissions Test Isn’t Part Of The M.O.T These Were Fitted Purely To Allow the manufacturer To Get Around The Emissions Controls When These Bikes Were New Many People Remove The Whole System As They Are Not Nice Looking, Go Rusty And Are Extra Weight On An Already Heavy Bike

Blanking Plugs Are To Cover Holes Left From Removing Hoses From Air Box and Carb This Will Stop It Drawing In Air/Dust etc

Kit Comes Complete With 4 Stainless Plates, 4  Gaskets, 2 Bungs, 8 Stainless Bolts & 8 Stainless Washers

Will Fit: GSF600 Bandit 2000-2004 GSF1200 Bandit 2001-2006 GSF650 Bandit 2005-2006

Replacement O-rings For The Front Oil Tubes

4 x Replacement O-Rings (Numbers 13 On The Picture)

High Quality Nitrile O-Rings Direct Replacement For Originals

Will fit: GSF600 95-04 GSF1200 96-05

*Please note listing is for the 4 O-rings only not the actual oil tubes*

Carburettor Float Bowl Gaskets

Available as a Pack of 1 or 4

High Quality Replacement Part

Carburettor Repair Kits

Available as a Pack of 1 or 4

High Quality Replacement Part