GSF1250

SU-6505 K&N Air Filter for Suzuki Bandit GSF650 & GSF1250

Designed to increase horsepower and acceleration whilst providing excellent filtration

1 x Rear EBC Brake Pad FA174HH

Lowering Kit for Suzuki Bandit Available in Various Drop Sizes for GSF1250

Front Caliper Repair Kit

High quality seals 

Kit Contains: 

4 x 27mm Pressure Seals

4 x 27mm Dust Seals

4 x 30mm Pressure Seal

4 x 30mm Dust Seals

4 x Caliper Splitting Seal

2 x Bleed Nipple

2 x Dust Cap

4 x Copper Banjo Washers

2 x Pins

Front Brake Master Cylinder Repair Kit

Kit Contains Quality Replacement Parts To Repair Master Cylinder

Clutch Master Cylinder Repair Kit

Kit Contains Quality Replacement Parts To Repair Master Cylinder

Lextek OP8C Carbon Fibre Oval Exhaust Can

51mm (2") Slip On Can With Link Pipe

To fit GSX650F 07-16, GSX1250F 10-16, GSF650 07-14 and GSF1250 Bandit 10-16  (NOT GT MODEL)

Comes Complete With Removeable Baffle, Can Strap & Exhaust Clamp

Clutch Push Rod (Bolt) Repair Kit

Kit Contains Quality Replacement Parts To Repair Clutch Push Rod

2 x Pairs of EBC Brake Pads FA158HH

Oxford Oximiser EL572 - 888 Motorbike Motorcycle 12V Battery Charger

The Oximiser 888 can be left permanently connected to provide guaranteed long term battery care.

Suitable for all 12V battery types up to 30Ah, including Gel, MF and Acid batteries. Heavily discharged batteries as low as 4.1V can be charged if the battery is not damaged.

Included with the charger is a removeable power lead and a permanent ring connection lead with fuse and weatherproof cap.

Cam Cover/Rocker Cover Gasket

Genuine Suzuki Part Supplied In Original Sealed Packaging

Original Part 11173-18H00

Genuine Suzuki Part in Sealed Suzuki Packaging

Rocker Valve Cover Gasket/Seal

Gaskets Fit Under Cam Bolts on Cylinder Head Cover (Rocker Cover)

Part Number 7 on Parts Diagram

Part Number 11191-27E20-000

Supplied Singly or as a Pack of 8

Will Fit:GSF600 Bandit 95-04,GSF650 05-16,GSF1200 Bandit 96-05, GSF1250 Bandit 07-16

Jack Up Kit to fit Suzuki Bandit GSF1250 and GSX1250

Lextek CP1 Stainless Steel Exhaust Can

Moto GP Style Exhaust With Carbon Fibre Tip

51mm (2") Slip On Can So Will Fit Most Aftermarket Link Pipes

Lifetime Warranty

Comes Complete With Can Strap & Exhaust Clamp (Not shown in photos)

Lextek OP1 Matt Stainless Steel Oval Exhaust Can

51mm (2") Slip On Can With Link Pipe

To fit GSX650F 07-16, GSX1250F 10-16, GSF650 07-14 and GSF1250 Bandit 10-16

Comes Complete With Removeable Baffle, Can Strap & Exhaust Clamp

OptiMate 4 Quad Program is the ultimate battery charger for 12V lead-acid and 12.8V lithium batteries on your motorcycle, ATV and other power-sport vehicles. 

Quad Program - select program 2 or 4 to charge through the BMW controlled 12V socket or program 1 or 3 for your Triumph socket or direct to the battery (seperate lead required). 

Select your battery type and the OptiMate 4 Quad will go through its fully automatic multi-step program to bring the battery safely to full charge.
 

Technical Specifications:

Recommended for: AGM, GEL and STD 121V batteries from 4-60Ah and Lithium (LiFePO4) 12.8/13.2V batteries from 2-15Ah
Charging Amps: 1.25A (constant current)
Charging Volts: nominal: 12V & 12.8V range: 0.5V-14.4V
Operation: 4 Charge programs
Steps: 9
Features: OptiMate 4 Quad Program tests before and after charging and can recover a flat lead-acid and lithium (LiFePO4) battery from as low as 0.5 volts.
Use: Indoor / outdoor (lowest temperature -40°c)
Input: Global (100-240V 50-60Hz), high efficiency (CEC listed).
Style: Weatherproof case with wall mounts, with 6ft / 180cm AC supply lead and 6ft / 180cm charge lead ending in SAE connector.
Save: Low Volt Start of 0.5V + 2-step* desulphation recovery (*1-step low volt pulse save during CAN-bus mode).
Safe: No risk of overcharging. Totally safe for vehicle electronics. Sparks suppressed. Safe for long-term battery maintenance. Automatic shut-down if short-circuited or battery disconnected.
Included: O1 weatherproof battery lead, O4 battery clamps and hanging hook.

Pair of Fork Oil Seal Retaining Clips

Direct Replacement Part

Will fit: All GSF1200 AND GSF1250 Bandits

Visbella High Temperature Black RTV silicone Gasket Maker

Visbella® High Temperature RTV Silicone is designed for Automobile production of bonding and sealing.

This product is a one component RTV Silicone sealant, curing completely without odor release.

Acid & Neutral solidified into elastic rubber strip after full cure.

It’s used for in engine, high-temp pipe system, gearbox, carburetor etc.

8 x High Quality A2 Stainless Steel Studs with 8 x Stainless Flange Nuts & 4 x Exhaust Gaskets

Ideal Upgrade For Original Bolts As The Studs Have Allen Key Hex Head Machined Into Them Which Makes Fitting/Removing Much Easier Than Original Bolts

Will Fit Bandit 600/650/1200/1250 ,GSXR600, GSXR750, GSXR1000, GSXR1100, GSX1400 and GSX1300R Hayabusa

Grade 316 Stainless Steel Rear Axle Nut

Machined with captive washer

M25 x 1.5mm (36mm Socket Size)

Highly resistant to corrosion this has a smooth look that's going to last

Domino 1152 Suzuki Style Grips

To fit 22mm 7/8" Handlebars

Right Grip 118mm Long - Left Grip 124mm Long

High Quality Grips Made in Italy by Domino

2 x Rear Wheel Bearing Dust Seals

For GSF1250 Bandit 2007-2017 and GSF1200 2006 Model Only