Tankcure Kit Motorcycle Fuel Petrol Tank Repair Sealer Available in 450g or 600g

1 x Tin of Tankcure Petrol Tank Sealant

"TANK CURE" products enable you to recondition the inside of your fuel tank in a professional way. "TANK CURE" is manufactured by POLY-SERVICE. This petrol resistant Tank Sealant is adopted on a large scale in The Netherlands, Germany, England and Belgium. Users have build up more then 15 years of very satisfying experience with this sealant. It has been successfully applied to steel tanks.

Application of the tank sealant

In order to guarantee a good result you always have to do some preparation on your tank Before you apply the sealant the tank should be absolutely dry, free of grease and almost free of rust. It is strongly recommended to use TANK CURE Cleaner and TANK CURE Rust Remover according to the user guidelines to guarantee a good result. These products are extensively tested in combination with the Tank Sealant.

"TANK CURE" tank sealant is based on a 2 component epoxy resin. After adding the two components together stir them thoroughly for a couple of minutes, empty the can in your petrol tank and seal the filler opening properly. Now slowly turn the tank in all directions. Keep turning for about 15 to 20 minutes. The sealant should touch all surfaces several times to form a good layer. Now open the filler cap and put the tank upside down to drain as much sealant as possible.

You will find several products on the market to treat petrol tanks. Whatever product you are going to use: It is very important to apply sufficient sealant to cover the inside of your tank completely. Being unable to look inside the tank during the sealing process you have to stay on the safe side.

Experience shows that you will need approx 450 grams for upto 20 litre tank & 600 grams upto 60 litre tank