Kit contains Quality O-rings and diaphragms to rebuild one fuel petcock
Will Fit:
GSF600 95-04
GSF1200 97-00 (MK1 Only)
2 x O-Rings where oil lines go into back of the cylinder
1 x O-Ring where lines go into crankcase
Will fit GSF600 95-04 and GSF1200 96-05 Bandit
Listing is for O-Rings only oil lines are listed separately
Replacement O-rings For The Front Oil Tubes
4 x Replacement O-Rings (Numbers 13 On The Picture)
High Quality Nitrile O-Rings Direct Replacement For Originals
Will fit: GSF600 95-04 GSF1200 96-05
*Please note listing is for the 4 O-rings only not the actual oil tubes*
The Stahlbus oil drain valve replaces the existing oil drain plug
• No contact with oil
• Easy changes due to quick release and no tools required
• Drain plug cannot be lost or damaged
• No risk of burns from hot oil
• Changing of seals is not necessary
Cam Chain Tensioner Gasket
Good Quality Athena Gasket
Direct Replacement
Will fit all GSF600 and GSF1200 Bandit and GSF650 05-06
Carburettor Float Bowl Gaskets
Available as a Pack of 1 or 4
High Quality Replacement Part
Carburettor Float Needle Valves Available as a Pack of 1 or 4 High Quality Replacement Part
Carburettor Repair Kits
Available as a Pack of 1 or 4
High Quality Replacement Part
Carburettor Inlet Rubber Cylinder Head O-Rings
Original O-rings Tend To Flatten And perish Over Time
If Removing The Inlets Then Its Recommended To Change The O-rings To Prevent Air Leaks
4 Supplied
Will fit:
GSF600 ALL MODELS
GSF1200 Mk I Only 1996 - 2000
GSF650 2005 - 2006
1 x Carburettor Mixture Screw
with Spring O Ring and Washer
High Quality Replacement Parts
Will Fit: GSF600 95-04, GSF650 05-06, GSX750 98-03
Engine Oil Seal Kit
Top Quality Seals Made In Japan To OEM Specs
Kit Contains Four Seals
High Quality Polished Stainless
Complete with Washers
Black Aluminium Oil Cooler
Good Quality Pattern Part
Direct Replacement For Original Part
Will fit: GSF600 1995-2004 and GSF650 2005-2006
Will fit: GSF600 95-04 and GSF1200 96-05
Complete Gasket Set for GSF600
High Quality Athena Gaskets
Consists of all gaskets and seals required to rebuild engine
Manufactured from high quality materials
Will fit: GSF600 95-04 GSX600F 88-97
Complete Gasket Set for GSF600
High Quality Athena Gaskets
Consists of all gaskets and seals required to rebuild top end of engine
Manufactured from high quality materials
Will fit: GSF600 95-04 and GSX600F 88-97
Replacement Valve Stem Seals
Good Quality Direct Replacement For Originals
Kit Contains 8 x Inlet Seals & 8 x Outlet Seals
Will fit the following: GSF600 Bandit 1995-2004 GSF650 2005 - 2006 GSF1200 Bandit 1996-2005
Cam Cover/Rocker Cover Gasket & 4 x Mickey Mouse Spark Plug Hole Gaskets & 8 x Valve Cover Gaskets
Good Quality Pattern Parts
Direct Replacement for Original Parts
Will fit:
GSF600 Bandit 95-04
GSF650 05-06
Cam Cover/Rocker Cover Gasket & 4 x Mickey Mouse Spark Plug Hole Gaskets
Good Quality Pattern Part
Direct Replacement for Original Parts
Will fit:
GSF600 Bandit 95-04
GSF650 Bandit 05-06
Gaskets Fit Under Rocker Cover Around The Spark Plug Holes
Will Fit: Suzuki GSF600 Bandit 95-04 Suzuki GSF1200 Bandit 96-05
Genuine Suzuki Part in Sealed Suzuki Packaging
Rocker Valve Cover Gasket/Seal
Gaskets Fit Under Cam Bolts on Cylinder Head Cover (Rocker Cover)
Part Number 7 on Parts Diagram
Part Number 11191-27E20-000
Supplied Singly or as a Pack of 8
Will Fit:GSF600 Bandit 95-04,GSF650 05-16,GSF1200 Bandit 96-05, GSF1250 Bandit 07-16
Cam Cover Gasket For Suzuki GSF600 Bandit 95-04 Good Quality Direct Replacement
Replacement Cylinder Base & Head Gaskets
Good Quality Athena Gasket
Direct Replacements For Originals
Will fit GSF600 Bandit 95-04
Replacement Cylinder Head Gasket
Good Quality Athena Gasket
Direct Replacement For Original
Will fit the following: GSF600 Bandit 1995-2004 GSX600F 1988-2001
Sump Bolt Repair Kit
Will fit: GSF600 95-04 and GSF1200 96-05
Clutch Cover Gasket Will Fit: GSF600 95-05 GSF1200 96-05 GSF650 05-06 Bandit
Full Engine Side Casing Gasket Set
For GSF600 Bandit 95-04
Gaskets for signal generator cover, starter gear cover and clutch cover
High Quality A2 Stainless Steel Frame & Engine Mount Bolt kit for Bandit GSF600 1995-2004
Improve the look of your bike, won't rust, tarnish or discolour like the cheap original ones
All frame bolts plus all the engine mounting bolts supplied in cap head (allen key) apart from the 2 long rear ones which are supplied in hex head
We recommend using a suitable copper anti seize compound on reassembly
Kit consists of 16 bolts plus all the relevant washers and nuts
EBC clutch springs
EBC clutch springs are 15% stiffer than standard
Which may result in a slightly 'heavier' feel.
Replacement Clutch Fibres For Suzuki GSF600 Bandit 95-04
EBC heavy duty clutch friction plates
Replacement Clutch Kit For Suzuki GSF600 Bandit 95-04
Kit Contains EBC heavy duty clutch friction plates, EBC clutch springs, and high quality Pattern Clutch Cover Gasket
Replacement Clutch Kit For Suzuki GSF600 Bandit 95-04
Kit Contains EBC heavy duty clutch friction plates, TRW Steel Plates, EBC clutch springs, and high quality Pattern Clutch Cover Gasket
17mm Nut Fitment for Easier Fitting and Removal
With Lock Wire Hole
Genuine Suzuki Oil Filter
Part number 16510- 07J10 (Supersedes 16510-07J00)
4 x High Performance Foam Air Filters
Fit GSF600 Bandit 95-04
Improves Acceleration and gives greater horsepower
Look Great on any Streetfighter project
PLEASE NOTE: It is essential after fitting these filters to rejet and reset your carburettors otherwise you may cause serious damage to your engine
SU-7593 K&N Air Filter for Suzuki Bandit and GSXR
Designed to increase horsepower and acceleration whilst providing excellent filtration
UK MAINLAND SHIPPING ONLY ON THIS ITEM DUE TO COURIER RESTRICTIONS WITH SHIPPING LIQUIDS OVERSEAS
4L Motul 5000 10w/40 High Quality Semi Synthetic Oil - Jaso MA2 High Quality Pattern Oil Filter
Motul 5000 Semi Synthetic 10w/40 4T Motorcycle Engine Oil 1 Litres
Motul 5000 Semi Synthetic 10w/40 4T Motorcycle Engine Oil 4 Litres
Putoline Super DX4 10W-40 Semi Synthetic Oil
1L Bottle
Putoline Super DX4 Semi Synthetic 10w/40 4 Stroke Motorcycle Engine Oil 4 Litres
High Quality Replacement Cam/Timing Chain
Simple To Fit With Correct Tools & Mechanical Knowledge Open Old Cam Chain & Connect With New Cam Chain, Pull Through & Rivet New Chain This Will Save Several Hours Of Work As The Engine Doesn’t Have To Be Fully Stripped
Will Fit: GSF600 Bandit 1995-2004
Visbella High Temperature Black RTV silicone Gasket Maker
Visbella® High Temperature RTV Silicone is designed for Automobile production of bonding and sealing.
This product is a one component RTV Silicone sealant, curing completely without odor release.
Acid & Neutral solidified into elastic rubber strip after full cure.
It’s used for in engine, high-temp pipe system, gearbox, carburetor etc.
