Heat Shield and Clamp And Collector Gasket for Suzuki Bandit
Genuine Carbon Fibre Heatshield & Stainless Clamp
1 x Exhaust Silencer Collector Box Seal Gasket Size: 54.3 x 59.7 x 27mm 1 x 63mm - 68mm Exhaust Clamp Quality Replacement for Original Parts Will fit all Suzuki Bandits
1 x Exhaust Silencer Collector Box Seal Gasket Size: 54.3 x 59.7 x 27mm 1 x 63mm - 68mm Exhaust Clamp Quality Replacement for Original Parts Will fit all Suzuki Bandits
To Fit Lextek OP1 Exhaust
Will Also Fit: OP5 OP15 OP16 O41 O31 O32
4 x Exhaust Header Gaskets
Choose size required from drop down options (measure Outside Diameter)
Front Manifold Exhaust Studs, Nuts and Gasket
For SV650 1999 - 2002
Price is for 1 x Gasket, 2 x Studs and 2 x Flange Nuts for the Front Exhaust Header
**STUDS MAY DIFFER VERY SLIGHTLY IN LENGTH TO ORIGINAL ITEMS BUT WILL FIT & WORK CORRECTLY**
Front Manifold Exhaust Studs and Nuts
For SV650 1999 - 2002
Price is for 2 x Studs and 2 x Flange Nuts for the Front Exhaust Header
**STUDS MAY DIFFER VERY SLIGHTLY IN LENGTH TO ORIGINAL ITEMS BUT WILL FIT & WORK CORRECTLY**
Exhaust Header Gaskets with Studs, Nuts & Grease
2 x Gaskets for the Exhaust Headers (Manifold Cylinder Head) (Choice of Copper or Alloy/Fibre)
4 x Stainless Studs & Nuts
Ideal Upgrade For Original Studs As The Studs Have Allen Key Hex Head Machined Into Them Which Makes Fitting/Removing Much Easier Than Original Studs
Packet of Copper Grease
Will Fit Honda CB500 1994-2003
New Replacement Exhaust Header Manifold Gaskets with Stainless Studs, Washers & Nuts
Set Consists of:
4 x Header Gaskets
8 x Stainless Tapered Studs (as per orignal parts)
8 x Stainless Washers
8 x Stainless Nuts
High Quailty Direct Replacement For Orginal Parts
Will Fit: Honda CB600F Hornet 98-13, CB900F 02-07, CBF600 04-10, CBF1000 06-10, CB1000R 08-15, CBR600F 91-12
New Replacement Exhaust Header Manifold Stainless Studs, Washers & Nuts
Set Consists of:
8 x Stainless Tapered Studs (as per orignal parts)
8 x Stainless Washers
8 x Stainless Nuts
High Quailty Direct Replacement For Orginal Parts
Will Fit: Honda CB600F Hornet 98-13, CB900F 02-07, CBF600 04-10, CBF1000 06-10, CB1000R 08-15, CBR600F 91-12
Lextek Rear Fitment 51mm Baffle This universal rear fitment exhaust baffle is designed to fit any slip on silencer with a 51mm inlet diameter This baffle fits into the rear of any Lextek 51mm silencer, with the flanged end pointing toward the front of the motorcycle It is then held in place once fitted back onto the pipework
Stainless Steel Studs and Flange Nuts for Manifolds A2 Stainless Studs & Nuts M8 x 1.25 Pitch
Available in 35mm, 40mm 45mm 50mm and 55mm and Pack Quantities of 2, 4 or 8
Choose length & amount required from drop down menu
Will fit many models please check your length and pitch is correct as we do not have fitment list and cannot be held responsible if damage is caused by wrong size/pitch being fitted
Exhaust Header Gaskets
Price is for 2 Gaskets for the Exhaust Headers (Manifold Cylinder Head)
Will Fit Honda CB500 1994-2003
Choice of Copper or Alloy/Fibre
8 x High Quality A2 Stainless Steel Studs with 8 x Stainless Flange Nuts & 4 x Exhaust Gaskets
Ideal Upgrade For Original Bolts As The Studs Have Allen Key Hex Head Machined Into Them Which Makes Fitting/Removing Much Easier Than Original Bolts
Will Fit Bandit 600/650/1200/1250 ,GSXR600, GSXR750, GSXR1000, GSXR1100, GSX1400 and GSX1300R Hayabusa
8 x High Quality A2 Stainless Steel Studs with 8 x Stainless Flange Nuts
Ideal Upgrade For Original Bolts As The Studs Have Allen Key Hex Head Machined Into Them Which Makes Fitting/Removing Much Easier Than Original Bolts
Will Fit Bandit 600/650/1200/1250 ,GSXR600, GSXR750, GSXR1000, GSXR1100, GSX1400 and GSX1300R Hayabusa
Exhaust Repair Kit 4 x Header Gaskets 8 x Stainless Header Bolts 1 x Exhaust Silencer Collector Box Seal Gasket 1 x Exhaust Clamp Quality Replacement for Original Parts
Exhaust Collets
Genuine Suzuki Part
To Fit GSF600 95-99 and GSF1200 96-00
Part No 2 on picture
2 Required for each side
Universal Exhaust Hanger Bracket
Laser Cut From 6mm Thick Aluminium
Holes Cut To Take 8mm Bolts
