Set Of 4 Blanking Plates For When Removing The P.A.I.R System That's Fitted To The MKII Bandit Engines
Made From 2mm Thick Bright Annealed Stainless Steel To Give A Polished Look
The P.A.I.R. System Isn’t Required For The UK As An Emissions Test Isn’t Part Of The M.O.T These Were Fitted Purely To Allow the manufacturer To Get Around The Emissions Controls When These Bikes Were New Many People Remove The Whole System As They Are Not Nice Looking, Go Rusty And Are Extra Weight On An Already Heavy Bike
Once The Original System Is Removed Replacement Gaskets Can Be Made From Gasket Paper, Or Just Use Silicone Sealant Or Instant Gasket Just To Prevent Any Leaks
Kit Comes Complete With 4 Stainless Plates, 8 Stainless Bolts & 8 Stainless Washers
Will Fit: GSF600 Bandit 2000-2004 GSF1200 Bandit 2001-2006 GSF650 Bandit 2005-2006
Set Of 4 Blanking Plates For When Removing The P.A.I.R System That's Fitted To The MKII Bandit Engines
Made From 2mm Thick Bright Annealed Stainless Steel To Give A Polished Look
The P.A.I.R. System Isn’t Required For The UK As An Emissions Test Isn’t Part Of The M.O.T These Were Fitted Purely To Allow the manufacturer To Get Around The Emissions Controls When These Bikes Were New Many People Remove The Whole System As They Are Not Nice Looking, Go Rusty And Are Extra Weight On An Already Heavy Bike
Blanking Plugs Are To Cover Holes Left From Removing Hoses From Air Box and Carb This Will Stop It Drawing In Air/Dust etc
Kit Comes Complete With 4 Stainless Plates, 4 Gaskets, 2 Bungs, 8 Stainless Bolts & 8 Stainless Washers
Will Fit: GSF600 Bandit 2000-2004 GSF1200 Bandit 2001-2006 GSF650 Bandit 2005-2006
Pack of 10
Choose from 6mm, 8mm, 10mm, 12mm, 14mm
Ideal for replacing washers on Sump Bolts, Calipers etc etc
Pair of Fork Oil Seal Retaining Clips
Direct Replacement Part
Will fit CB500 Years 1997-2003
Pair of Fork Oil Seal Retaining Clips
Direct Replacement Part
Will fit: All GSF1200 AND GSF1250 Bandits
Pair of Fork Oil Seal Retaining Clips
Direct Replacement Part
Will fit:
All GSF400, GSF600 and GSF650 Bandits
GSR600 2006-2010, GSR750 2011-2015, GSX650F 2008-2016, GSX1100G 1991-1996
Pack of 2 each measuring 94mm x 22mm
Ideal if you have an after market streetfighter undertray fitted
Essential to get your motorcycle through the MOT
Fully E-Marked
Available in Red or Amber
Front Brake Caliper Pins
Direct Quality Replacement For Rusty Standard Part
2 x Pins & 2 x R-Clips Supplied
Will fit the following models:
GSF600 2000-2004 (MK2 models fitted with tokico calipers)
SV650 1999-2016
Direct Quality Replacement For Rusty Standard Part
2 x Pins & 2 x R-Clips Supplied
Will fit GSF1200 Years 2001-2005 (MK2 models fitted with Tokico 6 pot calipers)
2 x Pins Supplied
Drilled For Cotter Pin Like Originals Unlike Most Aftermarket Pins
Will fit GSF1200 1996-2000
(MK1 models fitted with nissin calipers)
Front Brake Caliper Pins & Covers
Direct Quality Replacement For Rusty Standard Part
2 x Pins Supplied
2 x Covers Supplied
Will fit the following models:
GSF600 Years 1995-1999 (MK1 models fitted with nissin calipers)
Exhaust Header Gaskets
Price is for 2 Gaskets for the Exhaust Headers (Manifold Cylinder Head)
Will Fit Honda CB500 1994-2003
Choice of Copper or Alloy/Fibre
Renthal Plastic Bar End Bungs
Ideal For Race & Track Bikes
2 x Stainless Steel Pins Supplied
Drilled For Cotter Pin Like Originals Unlike Most Aftermarket Pins
Will fit GSF1200 1996-2000
(MK1 models fitted with nissin calipers)
Throttle Cables - Push & Pull
Will fit GSF 600 bandit 00-04
Good quality - Pattern Part
Direct replacement for standard part
Throttle Cables - Push & Pull
Will fit GSF 1200 Bandit Mk I Model 96-00
Good quality - Pattern Part
Direct replacement for standard part
Throttle Cables - Push & Pull
Will fit GSF 1200 Bandit Mk II Model 01-05
Good quality - Pattern Part
Direct replacement for standard part
Will fit GSF 600 Bandit 96-99
Good quality - Pattern Part
Direct replacement for standard part
Creates Holding Point for Pillion Rider
Full Adjustable Belt
5mm Thread
Nozzle Size 38
Pro Taper Braced Handlebars With Brace & Pad
Ideal Upgrade For Honda MSX125
Constructed from ProTaper AS20 aerospace aluminum
Chemically applied graphics are scratch- and peel-resistant
Clutch side knurling provides maximum grip adhesion
High-density foam bar pad included
**As With Any Aftermarket Bars These Will Need Drilling To Accommodate The Locating Pins Fitting Inside The Original Switchgear**
Putoline Super DX4 10W-40 Semi Synthetic Oil
1L Bottle
Putoline HPX R Motorcycle Fork Oil 1L
Available in 5w, 10w, 15w or 20w
Putoline Super DX4 Semi Synthetic 10w/40 4 Stroke Motorcycle Engine Oil 4 Litres
